Post by Russ on Oct 14, 2012 9:52:58 GMT -5
STREET STOCK RULES
1. Must be 100% stock !! No cross breeding entire drive must be same make as car ( chevy to chevy ford to ford and so on) Must appear to be factory engine to car with stock exhaust 1980 and newer cars only.
2. Engine must be mounted with stock mounts in stock position. No welding of mounts bolted only. No homemade cross members, cross members must be stock and bolted in not welded
3. Doors must be chained or wired. No more than 6 places.
4. Trunks must be chained or wired. No more than 4 places. TRUNKS MUST BEOPEN DURING INSPECTION! Car must have deck lid and or tailgate No welding or adding metal. Trunk lid must be in stock location. No tucking, wedging, pre bending, smashing, folding or anything else you can think of. No welding washers for holes.
5. Hoods may be wired or chained in 4 spots. X chain or 2 strands per hole. It must be sheet metal to sheet metal only. No welding washers for holes. Must be 12" hole in hood in case of fire. Remove hood latch!!! Hood must be open for inspection.
6. .Must use D.O.T. tires DOUBLES PERMITTED, no tractor, implement, or foam filled tires no valve stem protectors
7. You may leave stock gas tank in stock location or you may relocate the fuel tank to rear floor of car if this is done you must use a fuel cell or boat tank no stock fuel tanks permitted inside of car. Must only have 3 gallons of gas. You may be asked to drain it if the gauge doesn't work.
8. Windshield may be left in car you can remove windshield!
9. The following must be removed prior to entering the fairgrounds, windows , headlights, taillights, all chrome and mirrors. Interior must be swept clean of debris and glass.
10. Stock type springs and shocks. No solid suspension. No spring risers, wire, chains or any weld on rear ends or rear spring pockets. Cars must bounce & cars must be STOCK!!!!!
11. NO POSI TRACK REAR ENDS PERMITTED
12 Paint front doors in contrasting paint. Example if the car is black paint doors white
13. Do not strip under the hood. Battery must be in stock location. But you may put rubber mat over it or spray with foam around it not excessively. Do not spray foam on anything else.
14. YOU MAY USE AN 80 & NEWER BUMPER ON CAR THEY MUST BOLT ON IN FACTORY LOCATION AND MANNER NO WELDING
15. Do not weld rear ends stock only!
16. Read all rules carefully and follow them! It will be a cheap easy build. Any questions call! There will be no stretching or bending of any rules or you will either run in the modified class or go home.
1. Must be 100% stock !! No cross breeding entire drive must be same make as car ( chevy to chevy ford to ford and so on) Must appear to be factory engine to car with stock exhaust 1980 and newer cars only.
2. Engine must be mounted with stock mounts in stock position. No welding of mounts bolted only. No homemade cross members, cross members must be stock and bolted in not welded
3. Doors must be chained or wired. No more than 6 places.
4. Trunks must be chained or wired. No more than 4 places. TRUNKS MUST BEOPEN DURING INSPECTION! Car must have deck lid and or tailgate No welding or adding metal. Trunk lid must be in stock location. No tucking, wedging, pre bending, smashing, folding or anything else you can think of. No welding washers for holes.
5. Hoods may be wired or chained in 4 spots. X chain or 2 strands per hole. It must be sheet metal to sheet metal only. No welding washers for holes. Must be 12" hole in hood in case of fire. Remove hood latch!!! Hood must be open for inspection.
6. .Must use D.O.T. tires DOUBLES PERMITTED, no tractor, implement, or foam filled tires no valve stem protectors
7. You may leave stock gas tank in stock location or you may relocate the fuel tank to rear floor of car if this is done you must use a fuel cell or boat tank no stock fuel tanks permitted inside of car. Must only have 3 gallons of gas. You may be asked to drain it if the gauge doesn't work.
8. Windshield may be left in car you can remove windshield!
9. The following must be removed prior to entering the fairgrounds, windows , headlights, taillights, all chrome and mirrors. Interior must be swept clean of debris and glass.
10. Stock type springs and shocks. No solid suspension. No spring risers, wire, chains or any weld on rear ends or rear spring pockets. Cars must bounce & cars must be STOCK!!!!!
11. NO POSI TRACK REAR ENDS PERMITTED
12 Paint front doors in contrasting paint. Example if the car is black paint doors white
13. Do not strip under the hood. Battery must be in stock location. But you may put rubber mat over it or spray with foam around it not excessively. Do not spray foam on anything else.
14. YOU MAY USE AN 80 & NEWER BUMPER ON CAR THEY MUST BOLT ON IN FACTORY LOCATION AND MANNER NO WELDING
15. Do not weld rear ends stock only!
16. Read all rules carefully and follow them! It will be a cheap easy build. Any questions call! There will be no stretching or bending of any rules or you will either run in the modified class or go home.